{"id":75667,"date":"2021-11-01T17:53:48","date_gmt":"2021-11-01T15:53:48","guid":{"rendered":"https:\/\/olympusplus.gr\/?post_type=product&p=75667"},"modified":"2026-08-15T22:17:38","modified_gmt":"2026-08-15T19:17:38","slug":"filtru-de-apa-olympus-pentru-sub-blat-antimicrobian","status":"publish","type":"product","link":"https:\/\/olympusplus.ro\/en\/shop\/filtre-antimicrobiene-sub-chiuveta\/filtru-de-apa-olympus-pentru-sub-blat-antimicrobian\/","title":{"rendered":"OLYMPUS undercounter water filter (antimicrobial)"},"content":{"rendered":"

Olympus+ ceramic water filter \"\"<\/strong><\/h2>\n

Antimicrobial water filter, which destroys microbes inside the device and on the surface of the ceramic filter in 2 hours \u2013 Under-sink installation<\/strong><\/span> Installation and maintenance instructions \u2013<\/strong> Under-sink installation<\/strong><\/span><\/p>\n

Device Description \u2013 Package Contents<\/strong> <\/h3>\n

\"\" Device Description \u2013 Package Contents<\/u><\/strong> 1. Baz\u0103 din aliaj de cupru antimicrobian 2. Capac metalic din o\u021bel inoxidabil (compartiment de ap\u0103) 3. Robinet de admisie a apei (\u00een\u0219urubat \u00een baz\u0103 (1) cu band\u0103 de teflon pe filet) 4. Element de fixare metalic al conectorului. (Mai \u00eent\u00e2i trece\u021bi-l prin furtunurile (5 \u0219i 11) \u0219i \u00een\u0219uruba\u021bi-l bine la duzele de admisie \u0219i evacuare (3 \u0219i 9), dup\u0103 ce a\u021bi introdus \u00een prealabil furtunurile (5 \u0219i 11)) 5. Furtun de plastic 1\/4" (se conecteaz\u0103 la duzele 3 \u0219i respectiv 9) 6. Conector metalic al furtunului flexibil (5) cu robinetul (7) (mai \u00eent\u00e2i trece\u021bi conectorul prin furtun (5) \u0219i \u00een\u0219uruba\u021bi) 7. Robinet de alimentare cu ap\u0103 1\/4" la filtru (se conecteaz\u0103 la apa rece) pune\u021bi teflon sau c\u00e2nep\u0103 pe filet \u0219i conecta\u021bi-l la niplu (8) 8. Niplu (distribuitor \u00een T) pentru alimentarea cu ap\u0103 a robinetului de buc\u0103t\u0103rie \u0219i a filtrului. (Pune\u021bi band\u0103 de teflon pe filet \u0219i conecta\u021bi-l la sursa de alimentare). 9. Robinet de evacuare pentru apa filtrat\u0103 la robinet (\u00cen\u0219uruba\u021bi \u00een baz\u0103 (1) cu band\u0103 de teflon) 10. Conector metalic 11. Furtun de plastic 1\/4'' 12. Duz\u0103 metalic\u0103 pentru conectarea la robinet (trece\u021bi-o prin furtunul (11)) 13. Pan\u0103 de plastic (introduce\u021bi-o \u00een furtunul de plastic (11) pentru \u00eent\u0103rire) 14. Cilindru conic de plastic pentru etan\u0219are (niplu) (trece\u021bi-l prin furtun (11)) 15. Piuli\u021b\u0103 metalic\u0103 pentru fixarea robinetului (\u00een\u0219uruba\u021bi-o complet pe filetul robinetului pentru a stabiliza robinetul \u00een partea de jos a chiuvetei) 16. \u0218aib\u0103 metalic\u0103 zim\u021bat\u0103 (de cre\u0219tere) pentru fixare (a\u0219eza\u021bi sub \u0219aiba de plastic (17)) 17. \u0218aib\u0103 de sus\u021binere din plastic (a\u0219eza\u021bi sub chiuvet\u0103) 18. \u0218aib\u0103 de etan\u0219are din cauciuc (a\u0219eza\u021bi sub chiuvet\u0103) 19. \u0218aib\u0103 de etan\u0219are din cauciuc (a\u0219eza\u021bi deasupra chiuvetei) 20. Baz\u0103 metalic\u0103 oval\u0103 de sus\u021binere a robinetului (\u00eendep\u0103rta\u021bi capacul protector albastru din nailon) 21. Robinet pivotant din o\u021bel inoxidabil. 22. Filtru ceramic – cartu\u0219 de filtru de schimb (se \u00een\u0219urubeaz\u0103 \u00een centrul bazei metalice a dispozitivului) 23. \u0218aib\u0103 de etan\u0219are mare din cauciuc \u00eentre baza metalic\u0103 (1) \u0219i capacul metalic (2) 24. Disc antimicrobian din aliaj de cupru (instalat), pentru distrugerea microbilor Operating parameters<\/u><\/strong> \u2013 Maximum Operating Pressure: 7 BAR \u2013 Operating Temperature: 38 \u00b0<\/sup> C (100 \u00b0<\/sup> F) \u2013 Minimum operating pressure: 1 BAR (Reduced flow) \u2013 Recommended operating pressure: 3 \u2013 7 BAR \u2013 Minimum operating temperature 5 \u00b0C (41 \u00b0<\/sup> F). \u2013 Recommended filter flow rate for perfect filtration 1.5 \u2013 2.5 liters\/minute at a network pressure of 3 \u2013 3.5 BAR INSTALLATION ORDER OF RESERVE CASSETTES FOR DOUBLE OR TRIPLE FILTER<\/strong> <\/mark>\"\"\"\"\"\" IMPORTANT:<\/u><\/strong> Place the inlet (3) and outlet (9) valves in the base(s) and wrap<\/strong> Teflon tape (not included) around their threads to prevent water leaks.<\/strong> 1. INSTALLATION:<\/strong> (<\/strong> The customer is responsible for the correct and safe installation of the filter)<\/strong> The filter should be placed vertically under the sink, close to the water source, and its tap should be placed in the desired location on the sink. Cut the 2-meter hose included in the package into 2 pieces of a size so that when changing the filter, you can remove the device from the cabinet. (If the hose is cut at an angle, you will have a leak)<\/strong> 2. CAUTION<\/strong> Make sure the water inlet hole in the filter follows the direction of the arrow<\/strong> on the underside of the metal base (1) of the appliance (see figure 1). If<\/strong> is connected backwards, the ceramic cartridge will clog or break<\/strong> . SINK HANDLE AMPLIFICATION<\/strong><\/mark> \u2013 Drill a 11 mm (millimeter) diameter hole in the sink, at the desired location for the faucet (21), using a suitable drill bit ( drill first with a 6 millimeter drill bit<\/strong> ). \u2013 Before placing the faucet on the sink, first pass the nickel-plated metal base (20) through the faucet pipe, after removing the protective nylon layer, and pass the larger black rubber sealing washer (19) underneath. \u2013 Place the faucet in the hole you drilled in the sink, and on the side of the faucet located at the bottom of the sink, place the accessories (18), (17), (16) in the order shown in the drawing and screw the metal nut (15) completely to seal and fix the faucet to the countertop. \u2013 Pass the metal retainer (10) onto one end of the hose (11). Connect the hose (11) to the outlet nozzle (9) and screw the metal clamp (10) firmly. \u2013 On the other end of the hose (11), first pass the metal nozzle (12), then the oval plastic cylinder (nipple) (14) and then place the plastic wedge (13) inside the plastic hose to stabilize the nipple (14) in place. Screw the metal nozzle (12) firmly onto the thread on the tap stem. \u2013 Screw the cartridge (22) into the filter base (1) ( casual<\/strong> ), without tightening it too much, so as not to break it<\/strong> the plastic thread or ceramic filter or reduce the water flow.<\/strong> \u2013 Screw the metal cover of the appliance (2) firmly onto its base. Now open the tap and some black water may come out. FROM<\/strong> the filter tap for the first time, after rinsing the activated carbon<\/strong> . 3.<\/strong> CAREFUL:<\/u><\/strong> The first time and each time you change the cartridge, let the water run for 10 minutes. Do not use the filter for 24 hours. After the 24 hours, let it run for 2-3 minutes and the filter is ready for use. Also, if the filter remains unused for more than 3 days, let the water run for 2-3 minutes.<\/mark> 4.<\/strong> CAREFUL:<\/u><\/strong> Only use cold water through the filter. If you use hot water, the binding and sealing materials of the cartridge will come loose and sediment, mud, rust, as well as chemical elements in the water such as chlorine, etc., will not be retained by the filter.<\/mark> 5. FILTER REPLACEMENT (CASSETTE)<\/u><\/strong> When replacing or cleaning the ceramic cartridge, it is a good idea to make sure that any cuts or wounds on your hands are covered to avoid contact with germs that may have settled on the outside of the ceramic filter and that the antimicrobial copper in the base has not yet been able to destroy them, as it takes approximately 2 hours to destroy them. Otherwise, to replace the cartridge, follow the procedure as for the initial installation of the filter. To unscrew the metal cap (2), first turn off the water supply to the filter and at the same time open the filter tap (21) on the sink to release the pressure and unscrew the metal cap (2) more easily.<\/strong> Turn off the water supply to the filter when you want to:<\/strong> A)<\/strong> Completely shut off the water supply to the filter. B)<\/strong> Clean the cartridge.
\n<\/strong>C)<\/strong> Cartridge replacement. D)<\/strong> When you leave home for several days. 6.<\/strong> MAINTENANCE \u2013 CLEANING THE CERAMIC CARTRIDGE<\/u><\/strong> Every 3-4 months or whenever the water flow from the appliance tap decreases visibly<\/strong> (which means that the ceramic filter cartridge has become \"clogged\" with sediment, rust, mud, sludge, limescale, etc.), remove it from the appliance and, with cold water under the tap (without detergents), rub it well over the entire surface with the metal part of the dish sponge, or with a harder metal material, or even with sandpaper (number 80), to clean it and improve the water flow<\/strong> After rinsing it thoroughly, put it back in place. 7. RECOMMENDED FILTER FLOW \u2013 IT\u2019S TIME TO REPLACE THE REPLACEMENT CASSETTES<\/u><\/strong> IMPORTANT:<\/u><\/strong> The highest filter efficiency is achieved when the water flow through the filter does not exceed 1.5 to 2 liters per minute. The cartridge capacity is for 8,000 liters of water or for 10-12 months<\/strong> , whichever comes first. The cartridge life may be reduced in cases of networks loaded with impurities such as mud, rust, sludge, soil, limestone, etc., or in periods of drought, when the load on the water supply networks is very high (due to low water levels). In these cases, the filter must be cleaned much more often and replaced earlier if, despite cleaning, the water flow from the appliance tap is not restored<\/strong> .<\/em><\/mark> But regardless of the number of liters of water that will pass through the filter, you MUST replace the cartridge at least every 10-12 months, because from the moment it gets wet, its materials weaken month by month, and the water that passes through the filter will pass unfiltered.<\/mark> 8.<\/strong> MAINTENANCE OF THE DISC AND ANTIMICROBIAL BASE<\/u><\/strong> On the surfaces of antimicrobial copper alloy materials, and more specifically inside the base (4) and the disc (6) located therein, superficial discoloration may occur due to natural oxidation of the antimicrobial copper, deposits of various materials originating from water supply networks, such as rust, mud, etc. In these cases, these deposits, which do not hinder the overall operation of the filter in any way, are good, both for aesthetic reasons and for reasons of cleanliness of the filter chamber,<\/strong> be removed in the following way: a)<\/strong> Clean both surfaces of the antimicrobial disc thoroughly with something rough, such as pot wire, coarse sandpaper, etc. b)<\/strong> Clean the inside of the antimicrobial base in the same way to remove any rust-like deposits. 9. METAL DEVICES CLEANING PROCEDURE<\/u><\/strong> Wipe the appliance with a soft cloth slightly dampened with lukewarm water. Avoid using bleach or any chemical detergent or bleaching agent, or metal scouring pads, as these will leave marks on the metal surface of the appliance. 10.<\/strong> IMPORTANT!<\/u><\/strong> To protect the filter, after any interruption to the water supply, ALWAYS open the tap to let it run for a while before using the filter.<\/mark> 11.<\/strong> WARNING:<\/u><\/strong> The OLYMPUS+ water filter is intended for use in waters controlled by municipal or local authorities and which are suitable for human consumption.<\/mark> 12.<\/strong> BEWARE OF WATER PRESSURE<\/u><\/strong><\/mark> If the mains pressure is high, install a pressure reducer before the water filter. However, whether the mains pressure is high or low, it is essential to install a one-way (anti-shock) valve (available at plumbing stores) so that in the event of a sudden increase in mains pressure or a momentary snowstorm, the hoses or the filter unit do not break and cause flooding. When leaving home for several days, you should always close the water supply tap to the filter. View the product instructions in PDF format by clicking here.<\/strong><\/a><\/strong><\/mark><\/p>","protected":false},"excerpt":{"rendered":"