{"id":75738,"date":"2021-11-01T17:54:15","date_gmt":"2021-11-01T15:54:15","guid":{"rendered":"https:\/\/olympusplus.gr\/?post_type=product&p=75738"},"modified":"2026-08-15T22:17:37","modified_gmt":"2026-08-15T19:17:37","slug":"filtru-de-apa-olympus-pentru-blat-antimicrobian","status":"publish","type":"product","link":"https:\/\/olympusplus.ro\/en\/shop\/filtre-antimicrobiene-deasupra-blatului-de-bucatarie\/filtru-de-apa-olympus-pentru-blat-antimicrobian\/","title":{"rendered":"OLYMPUS countertop water filter (antimicrobial)"},"content":{"rendered":"

The tabletop antimicrobial water filter that destroys microbes inside the device and on the surface of the ceramic filter in 2 hours.<\/strong><\/span> Installation and maintenance instructions<\/strong> \"\" Operating parameters<\/strong> \u2013 Maximum operating pressure: 7 BAR \u2013 Operating temperature: 38 0<\/sup> C (100 0<\/sup> F) – Presiune minim\u0103 de func\u021bionare: 2 BAR (debit redus) – Presiune de func\u021bionare recomandat\u0103: 3 – 7 BAR – Temperatur\u0103 minim\u0103 de func\u021bionare 5 0<\/sup> C (41 0<\/sup> F) \u2013 Recommended filtered water flow rate for perfect filtration 1.5 to 2.5 liters\/minute at a network pressure of 3 \u2013 3.5 BAR.<\/strong> \"\"<\/p>\n

Device Description \u2013 Package Contents<\/strong><\/h2>\n

Filtrul de ap\u0103 Olympus+ include urm\u0103toarele piese de asamblare: 1. Rezervor de ap\u0103 (capac din o\u021bel inoxidabil) 2. Filtru ceramic (cartu\u0219 filtru de rezerv\u0103) 3. Col\u021b metalic pentru admisia apei cu clem\u0103 pentru ata\u0219area furtunului flexibil de conectare 4. Baz\u0103 metalic\u0103 din aliaj de cupru antimicrobian cu robinet \u00eencorporat 5. Niplu pe baza metalic\u0103 pentru ata\u0219area discului de cupru antimicrobian \u0219i \u00een\u0219urubarea cartu\u0219ului filtrului (pies\u0103 de rezerv\u0103) 6. Disc din aliaj de cupru antimicrobian (deja instalat) 7. Furtun flexibil pentru conectarea dispozitivului la robinetul de alimentare cu ap\u0103 8. Comutator (supap\u0103) metalic\u0103 pentru conectarea filtrului cu un comutator pentru selectarea apei filtrate – nefiltrate 9. \u0218aib\u0103 de etan\u0219are \u00eentre supap\u0103 \u0219i robinet (trebuie \u00eentotdeauna instalat\u0103) 10. Niplu pentru conectarea la un robinet cu filet interior sau la un robinet de du\u0219 11. Col\u021b metalic pentru ie\u0219irea apei \u0219i pentru ata\u0219area robinetului 1. ASAMBLARE A APARATULUI \u00ceN 1 MINUT<\/mark><\/strong> 1)<\/strong> Refer to the image of the device with parts numbered 1 to 11. 2)<\/strong> A\u0219eza\u021bi aparatul pe chiuvet\u0103 sau \u00een un spa\u021biu adiacent acestuia. 3)<\/strong> Scoate\u021bi cu grij\u0103 cartu\u0219ul filtrului (piesa de schimb), care se afl\u0103 \u00een interiorul capacului metalic (recipientul de ap\u0103) (1) al aparatului. 4)<\/strong> Unwrap the nylon wrapping around the filter cartridge (2). 5)<\/strong> screw casual<\/strong> the filter cartridge (2) clockwise, f\u0103r\u0103 a-l str\u00e2nge prea mult, pentru a nu rupe filetul de plastic sau ceramica sau a nu reduce debitul apei<\/strong> . 6)<\/strong> \u00cen\u0219uruba\u021bi ferm capacul metalic (1) spre dreapta. 7)<\/strong> De\u0219uruba\u021bi plasa de la robinetul de buc\u0103t\u0103rie spre st\u00e2nga \u0219i \u00een\u0219uruba\u021bi supapa (comutatorul) (8) spre dreapta \u00een locul s\u0103u<\/strong> (see details in section 2)<\/strong> . 8)<\/strong> For filtered water, open the tap and turn the switch handle to the horizontal position. (La prima utilizare, poate ie\u0219i ap\u0103 neagr\u0103 din sp\u0103larea cu c\u0103rbune activ)<\/strong> For unfiltered water, turn the switch to the vertical position. CAREFUL<\/mark> The flow rate of the filter tap also depends on the water pressure in the water supply network. At a network pressure of 3 \u2013 3.5 BAR, the filter flow rate will be approximately 1.5 \u2013 2.5 liters of water\/minute. If the network pressure is high, open the tap less to have a lower flow rate and excellent quality of the filtered water.<\/strong> ORDER OF INSTALLATION OF FILTER CARTRIDGES (SPARE PARTS) IN DOUBLE AND TRIPLE FILTERS<\/mark><\/strong> \"\" If your device is double or triple, place the filter cartridge with the green thread in position 1, and the salt or nitrate cartridges (blue or red thread) on the other bases, in any order.<\/mark> 2. CONNECTING THE FILTER TO THE TAP<\/u><\/strong> Unscrew the small mesh filter from the tap mouth so that the filter valve (switch) (8) can be screwed into place. If the tap thread is external after unscrewing the mesh, screw the supply valve (8) directly clockwise. Tighten firmly by hand and, as far as possible, avoid using a tool that could damage the valve or spoil the thread. If the tap thread is internal, use the nipple (10) for regular taps or shower taps. Screw the wide part of the nipple inside the tap (where you unscrewed the mesh) and tighten it well. Screw the supply valve (8 \u2013 filter \u2013 unfiltered water switch) to the thread with a smaller diameter of the nipple to make the connection. If your tap does not fit into one of the two previous cases, contact our company. CAREFUL<\/u><\/strong><\/span> : If the filtered\/unfiltered water switch is stiff when first turned on, apply more force to activate it.<\/mark> 3. CAREFUL<\/u><\/span> :<\/strong> The first time and each time you change the filter cartridge, let the water run for 10 minutes. Do not use the filter for 24 hours. After the 24 hours, let the water run for 4-5 minutes and the filter is ready for use. Also, if the filter remains unused for more than 3 days, let the water run for 2-3 minutes.<\/mark> 4. CAREFUL<\/u><\/span><\/strong> : Only cold water should pass through the filter. If you use hot water, the bonding and sealing materials of the filter cartridge will come off, as a result of which sediment, mud, rust, as well as water chemicals such as chlorine, etc., will not be retained by the filter.<\/mark> 5. FILTER REPLACEMENT (FILTER CARTRIDGE)<\/u><\/strong> When replacing or cleaning the ceramic filter cartridge, it is recommended to ensure that any cuts or wounds on your hands are covered to avoid contact with germs that may have settled on the outside of the ceramic filter and that the antimicrobial copper in the base has not yet been able to destroy, as it takes approximately 2 hours to destroy them. Otherwise, follow the filter cartridge replacement procedure as for the initial filter installation. 6. MAINTENANCE \u2013 CLEANING THE CERAMIC FILTER CARTRIDGE<\/u><\/strong> Every 3-4 months or whenever the water flow from the appliance tap decreases visibly<\/strong> (which means that the filter's ceramic filter cartridge has become \"clogged\" with sediment, rust, mud, sludge, salts, etc.), remove it from the appliance and, with cold water under the tap (without detergents), Scrub it thoroughly over the entire surface with the wire side of the dish sponge or a harder wire material or even sandpaper (number 80) to clean it.<\/strong> and improve water flow. After rinsing it thoroughly, put it back in place. 7. RECOMMENDED FILTER FLOW RATE \u2013 SPARE PARTS REPLACEMENT INTERVAL<\/u><\/strong> IMPORTANT<\/strong> :<\/u> The highest filter efficiency is achieved when the water flow through the filter does not exceed 1.5 to 2 liters per minute. The capacity of the filter cartridge is for 8,000 liters of water or for 10-12 months<\/strong> , whichever comes first. The life of the filter cartridge may be reduced in cases of networks loaded with impurities such as mud, rust, silt, earth, salts, etc., or in periods of drought, when the load on the water supply networks is very high (due to low water levels). In these cases, the filter must be cleaned much more often and replaced earlier if, despite cleaning, the water flow from the appliance tap is not restored<\/strong> .<\/em><\/span> But regardless of the number of liters of water that will pass through the filter, you MUST replace the filter cartridge at least every 10-12 months, because from the moment it gets wet, its materials weaken month by month, and the water that passes through the filter will pass unfiltered.<\/span><\/mark> 8. MAINTENANCE OF THE ANTIMICROBIAL DISC AND BASE<\/u><\/strong> On the surfaces of antimicrobial copper alloy materials, and more specifically on the inside of the base (4) and the disc (6) located therein, superficial discoloration may occur due to natural oxidation of the antimicrobial copper, deposits of various materials originating from water supply networks, such as rust, mud, etc. In these cases, these deposits, which do not hinder the overall operation of the filter in any way, it is advisable, both for aesthetic reasons and for reasons of cleanliness of the filter chamber<\/strong> , to be removed in the following way: a)<\/strong> Clean both surfaces of the antimicrobial disc thoroughly with something rough, such as pot wire, coarse sandpaper, etc. b)<\/strong> Clean the inside of the antimicrobial base in the same way to remove any rust-like deposits. 9. PROCEDURE FOR CLEANING THE EXTERIOR OF THE METAL DEVICE<\/u><\/strong> Wipe the appliance with a soft cloth slightly dampened with lukewarm water. Avoid using bleach or any chemicals such as detergent or bleaching agent, or metal scouring pads, as these will leave marks on the metal surface of the appliance. 10. WARNING!<\/strong><\/span> Every time you turn off the tap, the filter will continue to release a little water for a few seconds. This is normal as it releases the water pressure built up inside the appliance chamber.<\/mark> 11.<\/strong> IMPORTANT!<\/strong> To protect the filter, after any interruption to the water supply, you MUST first open the tap and let it run for a while before using the filter.<\/mark> 12. WARNING:<\/strong> The OLYMPUS+ water filter is intended for use in waters controlled by municipal or local authorities and which are suitable for human consumption.<\/mark> View the product instructions in PDF format by clicking here.<\/strong><\/a><\/strong><\/mark><\/p>","protected":false},"excerpt":{"rendered":"