Menu
← Antimicrobial filters above the kitchen counter

OLYMPUS countertop water filter (antimicrobial)

  • Clean and safe drinking water – eliminates chlorine, pesticides, heavy metals, asbestos fibers, hexavalent chromium, arsenic, lead, cadmium, toxic substances, while allowing the passage of beneficial elements, such as mineral salts and trace elements.
  • Antimicrobial protection – retains pathogenic microorganisms and destroys up to 95% of microbes inside the device within 2 hours. At the same time, it permanently disinfects the internal chamber of the device (self-disinfection).
  • Long filter life – up to 12 months or 8,000 liters of water (suitable for families of up to 5 people).
  • High-quality filtration with ceramic filter and activated carbon – options from 0.5 to 0.1 microns.
  • Greek production – easy installation of the faucet, with a 2-year warranty and constant technical support.
  • The replacement filter cartridge is included with the first purchase of the device.

Pore size *IMPORTANT NOTE REGARDING MICRONS: OUR COMPANY RECOMMENDS THE USE OF 0.5 MICRON FILTERS. When choosing 0.3, 0.2, 0.1 micron cartridges, you need to know that, the smaller the pores in microns, the lower the filter flow rate.

Made in Greece 2-year warranty Certified Technical support

WHAT CONTAINS: The ceramic filter in combination with compact activated carbon retains:

  • Chlorine
  • PESTICIDES
  • PHENOL
  • Toxic substances
  • Asbestos fibers
  • Hexavalent chromium
  • Cadmium
  • Arsenic
  • lead
  • Other heavy metals

Allowing ALSO the passage of beneficial elements, such as mineral salts and trace elements.

THE CERAMIC FILTER RETAINS MICROBES, AND THE ANTIMICROBIAL HONEY DESTROYS THEM: It retains 100% of pathogenic microorganisms, such as:

  • E. coli
  • Typhus
  • Cholera
  • Salmonella
  • Fecal coliforms
  • staphylococcus
  • Pathogenic and spore-forming bacteria
  • Enterococci
  • Cryptosporidium

The tabletop antimicrobial water filter that destroys microbes inside the device and on the surface of the ceramic filter in 2 hours. Installation and maintenance instructions Operating parameters – Maximum operating pressure: 7 BAR – Operating temperature: 38 0 C (100 0 F) – Minimum operating pressure: 1 BAR (reduced flow) – Recommended operating pressure: 3 – 7 BAR – Minimum operating temperature 5 0 C (41 0 F) – Recommended filtered water flow rate for perfect filtration 1.5 to 2.5 liters/minute at a network pressure of 3 – 3.5 BAR.

Device Description – Package Contents

The Olympus+ water filter includes the following assembly parts: 1. Water tank (stainless steel lid) 2. Ceramic filter (replacement filter cartridge) 3. Metal corner for water inlet with clamp for attaching flexible connection hose 4. Antimicrobial copper alloy metal base with built-in tap 5. Nipple on metal base for attaching antimicrobial copper disc and screwing in filter cartridge (spare part) 6. Antimicrobial copper alloy disc (already installed) 7. Flexible hose for connecting the device to the water supply tap 8. Metal switch (valve) for connecting the filter with a switch for selecting filtered - unfiltered water 9. Sealing washer between valve and tap (must always be installed) 10. Nipple for connecting to a tap with internal thread or shower tap 11. Metal corner for water outlet and for attaching the crane 1. 1 MINUTE ASSEMBLY 1) See the image of the device with the parts numbered 1 to 11. 2) Place the appliance on the sink or in a space adjacent to it. 3) Carefully remove the filter cartridge (spare part) located inside the metal cover (water tank) (1) of the appliance. 4) Unwrap the nylon wrapping around the filter cartridge (2). 5) screw casual the filter cartridge (2) clockwise, without tightening it too much, so as not to break the plastic or ceramic thread or reduce the water flow . 6) Screw the metal cover (1) firmly to the right. 7) Unscrew the mesh from the kitchen faucet to the left and screw the valve (switch) (8) to the right in its place. (see details in section 2) . 8) For filtered water, open the tap and turn the switch handle to the horizontal position. (When using for the first time, black water may come out of the activated carbon washing system) For unfiltered water, turn the switch to the vertical position. CAREFUL The flow rate of the filter tap also depends on the water pressure in the water supply network. At a network pressure of 3 – 3.5 BAR, the filter flow rate will be approximately 1.5 – 2.5 liters of water/minute. If the network pressure is high, open the tap less to have a lower flow rate and excellent quality of the filtered water. ORDER OF INSTALLATION OF FILTER CARTRIDGES (SPARE PARTS) IN DOUBLE AND TRIPLE FILTERS If your device is double or triple, place the filter cartridge with the green thread in position 1, and the salt or nitrate cartridges (blue or red thread) on the other bases, in any order. 2. CONNECTING THE FILTER TO THE TAP Unscrew the small mesh filter from the tap mouth so that the filter valve (switch) (8) can be screwed into place. If the tap thread is external after unscrewing the mesh, screw the supply valve (8) directly clockwise. Tighten firmly by hand and, as far as possible, avoid using a tool that could damage the valve or spoil the thread. If the tap thread is internal, use the nipple (10) for regular taps or shower taps. Screw the wide part of the nipple inside the tap (where you unscrewed the mesh) and tighten it well. Screw the supply valve (8 – filter – unfiltered water switch) to the thread with a smaller diameter of the nipple to make the connection. If your tap does not fit into one of the two previous cases, contact our company. CAREFUL : If the filtered/unfiltered water switch is stiff when first turned on, apply more force to activate it. 3. CAREFUL : The first time and each time you change the filter cartridge, let the water run for 10 minutes. Do not use the filter for 24 hours. After the 24 hours, let the water run for 4-5 minutes and the filter is ready for use. Also, if the filter remains unused for more than 3 days, let the water run for 2-3 minutes. 4. CAREFUL : Only cold water should pass through the filter. If you use hot water, the bonding and sealing materials of the filter cartridge will come off, as a result of which sediment, mud, rust, as well as water chemicals such as chlorine, etc., will not be retained by the filter. 5. FILTER REPLACEMENT (FILTER CARTRIDGE) When replacing or cleaning the ceramic filter cartridge, it is recommended to ensure that any cuts or wounds on your hands are covered to avoid contact with germs that may have settled on the outside of the ceramic filter and that the antimicrobial copper in the base has not yet been able to destroy, as it takes approximately 2 hours to destroy them. Otherwise, follow the filter cartridge replacement procedure as for the initial filter installation. 6. MAINTENANCE – CLEANING THE CERAMIC FILTER CARTRIDGE Every 3-4 months or whenever the water flow from the appliance tap decreases visibly (which means that the filter's ceramic filter cartridge has become "clogged" with sediment, rust, mud, sludge, salts, etc.), remove it from the appliance and, with cold water under the tap (without detergents), Scrub it thoroughly over the entire surface with the wire side of the dish sponge or a harder wire material or even sandpaper (number 80) to clean it. and improve water flow. After rinsing it thoroughly, put it back in place. 7. RECOMMENDED FILTER FLOW RATE – SPARE PARTS REPLACEMENT INTERVAL IMPORTANT : The highest filter efficiency is achieved when the water flow through the filter does not exceed 1.5 to 2 liters per minute. The capacity of the filter cartridge is for 8,000 liters of water or for 10-12 months , whichever comes first. The life of the filter cartridge may be reduced in cases of networks loaded with impurities such as mud, rust, silt, earth, salts, etc., or in periods of drought, when the load on the water supply networks is very high (due to low water levels). In these cases, the filter must be cleaned much more often and replaced earlier if, despite cleaning, the water flow from the appliance tap is not restored . But regardless of the number of liters of water that will pass through the filter, you MUST replace the filter cartridge at least every 10-12 months, because from the moment it gets wet, its materials weaken month by month, and the water that passes through the filter will pass unfiltered. 8. MAINTENANCE OF THE ANTIMICROBIAL DISC AND BASE On the surfaces of antimicrobial copper alloy materials, and more specifically on the inside of the base (4) and the disc (6) located therein, superficial discoloration may occur due to natural oxidation of the antimicrobial copper, deposits of various materials originating from water supply networks, such as rust, mud, etc. In these cases, these deposits, which do not hinder the overall operation of the filter in any way, it is advisable, both for aesthetic reasons and for reasons of cleanliness of the filter chamber , to be removed in the following way: a) Clean both surfaces of the antimicrobial disc thoroughly with something rough, such as pot wire, coarse sandpaper, etc. b) Clean the inside of the antimicrobial base in the same way to remove any rust-like deposits. 9. PROCEDURE FOR CLEANING THE EXTERIOR OF THE METAL DEVICE Wipe the appliance with a soft cloth slightly dampened with lukewarm water. Avoid using bleach or any chemicals such as detergent or bleaching agent, or metal scouring pads, as these will leave marks on the metal surface of the appliance. 10. WARNING! Every time you turn off the tap, the filter will continue to release a little water for a few seconds. This is normal as it releases the water pressure built up inside the appliance chamber. 11. IMPORTANT! To protect the filter, after any interruption to the water supply, you MUST first open the tap and let it run for a while before using the filter. 12. WARNING: The OLYMPUS+ water filter is intended for use in waters controlled by municipal or local authorities and which are suitable for human consumption. View the product instructions in PDF format by clicking here.

Water filter OLYMPUS + fără prescripție medicală (antimicrobial) is effective for 1 year or 8,000 liters of water (whichever comes first).

TESTED BY:

  • 3 Certified European Chemical Laboratories
  • Agricultural University of Athens for bacterial retention (2010)
  • The Microbiology Laboratory of the Faculty of Medicine of the University of Athens for the destruction of microbes inside the device

MADE BY:

  • Ceramic materials and activated carbon
  • Stainless steel and antimicrobial copper alloy parts (CW606N and CW508L) registered with the US Environmental Protection Agency (EPA).

GLOBAL INNOVATION: The OLYMPUS+ antimicrobial water filter is a world innovation patented by CENTER PLUS SA, being the only water filter in its category that has an internal antimicrobial protection system, ensuring increased safety for users, having the ability to continuously destroy up to 95% of the microbial flora of pathogenic microbes within 2 hours, which the micropore ceramic filter retains and, at the same time, permanently disinfects the internal chamber of the device (self-disinfection). UNIQUE ANTIMICROBIAL PROTECTION SYSTEM: The careful combination and arrangement of the antimicrobial parts of the device constitutes the revolutionary OLYMPUS+ Water Filter Antimicrobial Protection System, as the continuous release of copper ions destroys the cell membrane and DNA of microbes on their contact surfaces, both in the device chamber and on the surface of the ceramic filter, due to the halo effect (Hallo Phenomenon), which is a property of copper, destroying microbes even at a certain distance from the copper. SCIENTIFIC - MEDICAL DOCUMENTATION: The OLYMPUS+ antimicrobial water filter was developed and manufactured by CENTER PLUS SA. The scientific documentation of the product for the destruction of microbes inside the device was carried out by the Microbiology Laboratory of the Faculty of Medicine of the University of Athens, which for 12 consecutive months studied and finally MEDICALLY CONFIRMED the antimicrobial action of the OLYMPUS+ water filter in collaboration with the scientific team of the Hellenic Institute for Copper Development (GIRM).

INSTALLATION: With the above-the-counter filter, connecting the filter is done directly by you in 1 minute and there is no need for a technician to come, as installation is easy.

DIMENSIONS:

  • OLYMPUS+ width 7.5 cm x height 31 cm.

CONSUMER SAFETY: Suitable for waters controlled by municipal authorities and suitable for human consumption.

If your water is not potable, our company recommends that you, before purchasing any filter, contact your supplier (where you pay your water bill) or the municipality and request a chemical and microbiological analysis of the water. Based on this analysis, we will be able to recommend the model that will cover 100% of your network's needs.

Additional information

Weight 2,55 kg
Dimensions 7.5 × 31 cm
microns

0.1 micron, 0.2 micron, 0.3 micron, 0.5 micron

How to install?

The connection is made directly by you to the tap and is very simple - no technician is needed.

How often do I need to change the cartridge?

Every 12 months or 8,000 liters of water, whichever comes first. In the meantime, the cartridge can be cleaned to maintain good flow.

What does it remove from the water?

It removes chlorine, pesticides, heavy metals, asbestos fibers, hexavalent chromium, arsenic, lead, cadmium and toxic substances, while preserving beneficial mineral salts and trace elements.

How many people is it suitable for?

This particular model is suitable for families of up to 5 people. It filters up to 8,000 liters of water or up to 12 months.

What guarantee is there?

2-year warranty and constant technical support. Greek production center Plus SA.

5.0133 reviews
Konstantinos Vasiliadis
I have had the direct sales water filter (stainless steel) for a few months now. So far I am very satisfied, the water is clean and no longer has the strange taste it had before using the filter. The installation was very easy and the design is simple and beautiful. From a financial point of view, I am also satisfied, as it is much more economical to buy a new replacement filter once a year than bottled water every week. It is also very important to avoid the possibility of ingesting microplastics if you choose a filter over bottled water.
google · 2026-01-02
GeoNinja
The counter filter I received is 100% worth it, it has a high quality, and its price is really very fair. I am very glad that it is made in Greece, it shows how many things we could have and export, not just import and produce nothing. Congratulations to the company, because this filter can really enter every home for only 45 euros per year - now it is an excuse not to have a water filter or to buy much more expensive ones, and with a rental device, not to mention the competing company for understandable reasons. Addendum: Replacement after a year and 2 months, you can see how dark the old one has become, and the pressure has dropped by half due to the dirt it was holding. As soon as I replaced it, the water pressure in the filter was restored.
google · 2025-08-08
X Kouts
The water in the area where I live is sour, with limescale and chlorine. I decided to order a filter for my tap from the counter. I am now in my third year of using it and I am completely satisfied, as it has changed the taste and quality of the water. Ordering the filter is very easy, and the plus is that every year the company sends you a reminder message that the filter needs to be changed, so you don't forget.
google · 2025-06-05
Christos Petrakis
Folosesc filtrul fără prescripție medicală de al doilea an... Am comandat o piesă de schimb și a ajuns în 1 zi. Locuiesc în nordul Greciei. Am simțit diferența în apă imediat ce am luat o înghițitură de la robinet. Felicitări pentru sănătatea pe care ne-o oferiți.
google · 2026-01-12
Cart (0 products)
Your cart is empty.
See the products
The product has been added to the cart.